Recent content by 2002tbva

Can someone help me out here? My wife's 2002 TB LTZ has been experiencing an issue with her AC / Heater turning on and off by itself. The LCD panel actually turns off and whatever is running (usually heat due to being December) will turn off and when the LCD panel turns back on it sometimes...

Hey Roadie, I am currently dealing with the GM main mechanic (who already stated that there is nothing wrong) and also the results of inspector which the warranty company sent out last week. As of Friday of last week I explained to the warranty company that is still believe there is something...

Wow guys.... Thanks so much for the extra insight here !! I can't believe the dealer didn't even realize this and neither did the inspector who came in to oversee the whole issue even after I showed them what I thought was wrong and even shook the whole axle just like in the video. I knew there...

Took a video clip of the movement which is located here --> https://www.youtube.com/watch?v=R5wikdaJt2k I cleaned the grease around the boot area to help me determine if grease is still slinging out so only time will tell. I do understand the functionality of the CV joint in that it's supposed...

First off.... thanks for your insight on this issue I'm having! I really appreciate the time you and others put into helping others on this site. Big thumbs up !! Well update to the story. I did check the hub nut and it's set to torque specifications so that wasn't the issue. My issue now is...

Hello Roadie - As far as I know they didn't even take the wheel off the truck. I guess they were just trying to figure out what was wrong with the front CV axle to call it in to my extended warranty company (Endurance). They told my extended warranty company that there was grease all over and...

Hello All, I have a question which I'm hoping someone can assist me with. While completing some other front end suspension work on my 2002 TB LTZ I noticed that the front right CV axle had a little play in it (about 1/16 -1/8 inch) when moving it left to right (from CV joint to wheel hub) and...

Just wanted to provide an update on the issue. I took it to a local shop and it looks like the Right Lower Control arm bushing is bad. I also had a little play in the passenger lower ball joint. I'm going to have the shop do the control arm bushing work since it will be a bitch to do in the...

Hi Roadie, Just wanted to provide an update since you were nice enough to help. What I did was loosened up the bolts on the latch (attached to truck) then grabbed a chisel and small sledgehammer and hit it a few times till I saw it moved in. I traced the outside of the bracket beforehand so I...

Thanks for the information Mooseman. I'm going to head to my local audio shop after work today and purchase 2 rears which are rated at or around the 2.4 ohms you stated and hopefully I get some sound back. Thanks again !!

You are correct. My driveway has a pretty big incline and that's really when the wife and I hear it. I really did torque the end link bolts to spec and maybe even a tug futher so not sure if this is could be the issue. I will have a shop diagnose for me which I'm thinking is going to be worth...

Let me know what results you get if you ever do it. I'm going to do some more research and i'm sure I'll find an answer somewhere. Thanks !

Hello All, A few years back my drivers side rear speaker stopped working and I replaced it with a cheap style Jenson PowerPlus 525 speaker. It worked but the sound was always really low compared to the front speakers. Well I just realized that the passenger side rear isn't working now so my...

Hello All, Need some help figuring something out here please. My 02 TB driver door shakes and makes the occasional thump sound when hitting bumps. I'm not sure where I adjust to make the door close tighter. Looks to me..... both door and frame latch are non adjustable. Is this correct or am I...

Thanks Roadie - I was able to figure it out. I pretty much adjusted the star (larger gap means adjusted higher) till the rotor couldn't slide back on without out touching the parking brake pad and then adjusted down till they did fit. Parking Brake is a lot better now and grabs nicely on a half...