Recent content by bgipson89

I have the supreme suspension lift. I got actual lift of 3" (total change was a lot more due to sagging springs) but I only have it because I get a steal on it ($50 from a buddy)

Rear is done. It was indeed a pita. 2 hours with water breaks (heat index was like 110) now to figure out how to post pics lol

Spacers? Or on stock everything but lift?

Finally got my rear lift on so I'm gonna try and get the tires tomorrow

So test a front and go from there. Sounds like what I'll do. Nothing to look for in the back?

It's actually common to be small. My 35 km2s measured like 32.75". That's why I was hoping maybe I could shove these in there. I can't afford spacers or new wheels at the moment t and need at least 2 tires. For 150 bucks I was hopeful. I guess I'll get one mounted and see. Am I correct in...

I have a 3" lift on the front (thread in suspension section) and measurement t was off 2 different tires.

Think I'm gonna end up flipping mine before I align it. Still haven't gotten around to the rear, been out of town.

My buddy has a set of 265/75 buckshot tires that I measured and they were 30.5" by tape (slightly worn maybe 60% tread) would it be worth trying to see if they would clear since I keep seeing max size is 30.5? I'm not opposed to a uca flip or a slight grins if need be. Do I need to check width...

*supposed to be* a 20 minute job lol. I have that luck where 20 minutes becomes 2-3 hours

I've managed to get the front on so far and dang if it didn't raise it a lot. Little stiffer, but it's a 4wd suv. By tape I gained 6.5" to the top of the wheel well (must've been sagging bad) gonna try to get the rear on Friday evening. Pics as soon as I get done

Oh my God what is that death trap?

So after looking around, maybe I got a 2.5. Should still improve the looms a lot. Here's what I got. http://m.ebay.com/itm/290928112941?nav=SEARCH

I bought it from a friend for 50 bucks. Should've said that. Almost identical in design to markmcs 2.5".

Well, I ended up with the deal of the year on an actual lift (not a top mount) so looks like I'm doing it right. It's supposed to be 3" (has a big inside spacer and about a 1/2" on top) with a 3" or so rear spacer. Came from one of the 6" combo nation kits from the interwebs somewhere. But for...