Recent content by BigEagle

Well, it goes to the web page but I don't know what to do next. There aren't any buttons that i could find.

Hello All, so I checked around and found a local transmission shop that checked the pcm for free. After all , they were working on their atv's. The tech2 said pcm was bad. The mechanic felt bad giving me the bad news. I felt relieved--there was not much left to change/check. So I called PCM of...

Hello, I don't know what your problem is but I agree in that the alt bolt on the bottom is a bear. I changed my alt recently and experienced the same charging levels as before (saw the batt guage go up and down at will and bright and dim lights.) Found on other threads that that pcm control the...

So, I finally got the wiring harness in the mail but wasn't able to work on the truck because of all the Holiday activities on the schedule. The wiring harness has been replaced with a brand new one made in Mexico. After reassembly, the truck ran the same. with the same misfire and code. In...

Hello, I did not twist and pull or otherwise stress the wires and connections while testing. I did check the pins and all appear to be straight. Brand new injectors. I did pull the coil wire connector on number 1 while running and it made no difference but ran worse when pulled number 2 coil...

I put it all together before Thanksgiving Dinner and running. Good news is I put it together and it runs!!! Bad news is that it still throws the p0201 code. It runs just slightly rough (with an obvious miss.) I pulled the number one coil harness plug while running and it ran the same. So, whats...

Too many computers!!!

So I received the injectors by mail from Amazon. Can't believe they were only $25 each instead of $150 each from Gordon Chevy Orange Park, fl . What a deal. At the Zone and Adanced were around $50-$60 each. So Church and volunteering at food bank and work, I finally have chance to work on...

I found the oil curious. Probably not a head gasket because it was not just between two specific cylinders. If the injectors don't fix the problem then maybe the PCM or camshaft position sensor or ..........well one thing at a time. I hope I remember where all those bolts go. If all else fails...

Well, it all started last year with the Envoy running rough and missing badly. Took it to dealership and $800 later all ran nicely, for a year. Now has same/similar problem just nat as bad- yet. After searching around and finding some very good tips (May03LT) , I did some troubleshooting. I...