Recent content by Kujo929

Mine only had 2 screws. One on each side in the tabs. I used a micro driver but mostly just used the socket with the extension in my hand to turn the screws out. Again this is all by feel as I can only get my left arm up there. As for the vent I pulled it out on the right side and just lowered...

By the way, no pry bar neded on mine. It basically fell off once the screws were removed.

I'm in the middle of this repair now and was able to remove and install the actuator without removing the triangle mount and just pulling the air duct down. Not ideal and you have to mount the actuator and screws by feel but it can be done. My issue at the moment is getting the actuator in the...