Recent content by LawnRanger

Well, it turned out to be the caliper. It was under warranty so I got a replacement for free. When I pulled the tire off and then the caliper it was leaking around one of the pistons. I the pushed the brake pedal down and only one of the pistons was moving ( the one that was leaking was...

I didn't swap pads when I swapped rotors. I don't get any vibration when stopping so I think Rotors are ok. I forgot to mention that the pads I put on ( I did all 4 sets) are ceramic. I thought I read somewhere that its best to put new rotors on when going to ceramics, but the squealing started...

Hi, I am having an issue similar to blackout51's from this thread - http://gmtnation.com/f78/brakes-squeak-when-moving-slow-why-5540/ . But its only happening on the passenger side front. My calipers on the front are about 8 months old, along with the pads. I put some brake lubricant at all...

I completely understand that . I was just a little concerned because I have owned this vehicle for 7 years and this is the first time that this has ever happened. Fake or not, I do not like seeing my gauges lighting up telling me that there is a problem :undecided: I got the switch replaced and...

Ok, so I am changing the oil and the oil pressure switch. I pulled the wire off of the old pressure switch and oil was dripping out of it. I don't think that should be happening, so I wonder if that was the culprit. I don't know if there is a special socket or anything to get the switch out, but...

The AC wasn't on- It doesn't work. I just replaced the condenser and getting it evacuated and charged on Mon/Tues. I cleaned the throttle body about 6 months ago. I may do that again when I do the oil on Monday. I didn't look at the tach as this was happening, but it didn't appear to be running...

Hello. I have a 2002 trailblazer LS with the I6 4.2 engine ( 128k miles). I just drove for about an hour and as I was on my way home I was stopped/idle at a traffic light near my house I noticed that the oil pressure gauge dropped all the way to the left indicating no pressure ( the check gauges...