Recent content by lenlo

I put the allen wrench in there with the lower steering wheel shroud removed so I could see where I was putting it. There is a metal tang that provides friction and then will seat itself in the groove of the tool, to help it stay put once fully inserted. That same tang also provides enough...

New GENUINE OEM GM 26109034 Steering Angle Sensor $29 USD free shipping. This guy has 7 of them at that price. http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5338077216&icep_item=202449325389 This guy has 10 available for $39 with free shipping. He already...

I kept getting the "service stabilitrak" DIC message and the yellow traction control warning light on my dash every time temperatures would dip below 40 degrees and I first turned the steering wheel. A quick restart of the vehicle and the light would disappear for the rest of the day. With...

The tool (j42640) is not necessary and does not hold the wheel dead center. You can accomplish the exact same thing as the tool with a 6" long 3/16" allen wrench, or anything roughly 3/16" wide and 6-8" long. Center the wheel visually. Slide the long end of the allen wrench in the center...

The '08 Burban - I have no access to GM-SI, just what I find from google. I see some folks with Pontiac Gx's have suggested the same that you originally recommended to unplug the brake booster vacuum switch to disable AFM temporarily so I know it's more than just GMT360's that your solution...

MooseMan - I tried the brake booster sensor disconnect on my 2008 Suburban with LC9 to troubleshoot the cloud of smoke I'm getting at cold startup 20% of the time and narrow it down to DOD/AFM. At first the DIC just said 'Service Brakes Soon'. I then got a CELight - I'm assuming it's due to...

Worked perfectly! This should stop the melting from the already slightly melted turn signal lenses.