Camdo

Latest Activity Postings About

• • C

    Camdo reacted to Mooseman's post in the thread Tool Talk with Like.

    I'm wanting to get one of these but they're all out of stock. https://www.princessauto.com/en/10-mm-x-3-8-in-dr-emergency-socket/product/PA0009456245 But they do have this set of all 10mm...

    May 28, 2026
  • C

    Camdo reacted to movietvet's post in the thread Ignition coil pack brand recommendation with Like.

    IMO only, coils need to be replaced in sets. These are easy enough to get to, if you don't. But again, IMO.

    May 6, 2026
  • C

    Camdo reacted to c good's post in the thread Ignition coil pack brand recommendation with Like.

    Just watched the video. I'm not too sure about the carb cleaner being sprayed all over stuff to find vacuum leaks. Wouldn't that be a problem on plastic and rubber parts? I've always used a...

    May 6, 2026
  • C

    Camdo reacted to Mooseman's post in the thread Ignition coil pack brand recommendation with Like.

    One thing you could do as a hack to reseal the plug wells is to add a washer under each coil mounting bolt head. This will add a little extra pressure to the valve cover to seal the squished gasket.

    May 6, 2026
  • C

    Camdo replied to the thread Ignition coil pack brand recommendation.

    Thanks for the video mrrsm. Although I did not have a P0174 lean fuel air condition, it was informative as to the many nuanced ways failures can occur, and has me thinking. At 200,000 miles, I...

    May 6, 2026
  • C

    Camdo reacted to mrrsm's post in the thread Ignition coil pack brand recommendation with Like.

    Coil On Plug Failures is NOT a Cause...But a RESULT that occurs whenever any engine develops Lean Fuel Air Conditions in the Cylinders that JACKS UP the Secondary Side High Voltage creation inside...

    May 6, 2026
  • C

    Camdo replied to the thread Ignition coil pack brand recommendation.

    I replaced a bad ignition coil 2 years ago with a Walker brand on #1 cylinder. Now the Walker ignition coil on #1 cylinder has failed.

    May 5, 2026

  Show older items
• Loading…
• Loading…