Recent content by 98tsiawd

Hi guys, I think I have a charging issue I'm hoping you can help me with. The last 2 previous winters i had no problems with my charging system or battery, I did replace the battery as a preventative measure last year with a diehard gold series. this past summer I did install an external...

I replaced my blower motor and it works on all speeds, however I don't get a lot of air coming through the vents on the dash, I get lots of air through the floor vents and defrost vents, could this be a new problem? Thanks for the help

I finnaly got around to taking the resistor out and looking at the wires. The resistor has a plug with 3 wires going into it, the wires look new no charred parts everything looks good. Is there a way to test the wires, resistor and blower motor to see if any one of them are faulty? I have the...

Hey guys, My truck doesn’t get driven very often and about a month ago I jumped in and took it for a drive, (the truck had been sitting for about 2 weeks) and the blower motor wouldn’t work on any speeds. I drove the truck for about 10 mins and the motor started working again on all speeds. I...

Thanks for the help guys. Any recommendations on wether or not I'll be ok with running my current monroe shocks or should I look at upgrading them? Thanks again

I’m looking to lower my 02 envoy SLT SWB 4x4 and I don’t want to go too low, so I’m looking at the Eibach kit. Since this kit is 1.5/2.0 would you guys recommend i also install the DJM UCA? Or should I be alright being it’s only a 1.5 drop in the front? I will also be changing out my UCA...

First off I want to say this site is great. I've been rigging up my envoy to be a better tow vehicle and have had a bunch of questions along the way, thank you to all who have helped me out. I do have to say also I was a bit skeptic about my envoy being able to pull my trailer with my car on it...

Thanks for the help, I'm going to pick up a scale tomorrow, I definately need to weight the tongue as I tried to back my car on but the car is too low and it scrapes the front bumper pretty good. I need to make sure I'm not over weight on the tongue. I did measure how much sag there is and my...

thanks for the info guys, I think I'll stay away from these guys. Roadie I think I'll try your idea of backing the car on the trailer. I'm going to take some measurement of why ride height with no trailer attached to having the trailer attached with the car facing forward then rear facing to...

http://shop.supersprings.com/p/coil-sumosprings-css-1195 Has anyone run something like this and what are your thoughts? I'm asking b/c I run airite 1000 bags in the rear of my unit and with my trailer hooked up and 35 psi in the bags, the truck still squats a bit so I'm wondering if something...

Thanks for the help guys, I bought a new brake controller, confirmed the neg and pos wires for the breakaway battery and all is good again.

I do have a multi meter but to be honest I'm not 100% on how to use it for this case, I've only ever used it for checking the charging system on my car.

live and learn, it sucks i have to learn the hard way :( before i put a new controller in i want to make sure the breakaway battery cables are going to the right terminals on the battery. Unfortunately for me both cables are the same color, i havent had time yet to look to see where the cables...

so I decided to fix the two wires on my breakaway switch, they had bare wire showing so i removed the crimps, soldered them and resealed them up. then I put a new breakaway battery in, then afterwards got in my truck and my break controller is flashing S.H. I looked in the manual and it says the...

Here's some motivation to buy another one :) http://farm6.staticflickr.com/5452/9386740805_4f7a48d3c9.jpg "http://m.flickr.com/photos/76301897@N08/9386758229/