Recent content by kenjohn1204

Yes, first thing I did.

So I’ve been using tis2000 to program bcm and ecu for the last couple of months. About a week ago the program would not open any longer. I uninstalled it and reinstalled software. Now whenever I get to the programming part which is after you select the module you want to program. I get an...

So, I’ve been trying to do some off car programming on Saturn Vue 2.2l PCM. I can’t seem to find any info on the wiring. Yet the most important thing would be to find the “e” number for it. For instance 2004-2007 Cadillac CTS/SRX uses the e55 GM hardware code. If anyone could help, it would...

I was trying to program and 2008 Acadia Fuel Pump Control Module. I was wondering if it could be done. Without having to go online and purchase the $40 subscription.

I was wondering what lrogram I could use to program a fscm for the Acadia?

I still haven’t been able to verify if the bcm has took the new vin. I have been able to unlock radios and program vin into the ecu. I believe the bcm has to the new vin, I just can’t confirm it.

Cool, I will add a pcm to the mix and see if that works. Thanks to everyone for taking their time out to help. Hopefully as I learn I too can add to this community.

I was able to program the bcm by itself. I can see the updated calibration, but can not find a place to verify the updated vin number. I went through tis2000 to program it.

So I was trying to flash the bcm and update the vin number. With the ecu I can confirm the vin change. Yet with the bcm, I am unable to confirm that the new vin number has took. I have been in ever menu in the Tech2win and tis2000 software but can’t find out how to read the bcm vin number...

Thanks so much guys, I finally figured out what I was doing wrong. I was running both the tech2win software and the tis2000 at the same time. Once I only ran the tis2000 I was able to program the bcm. Now I have a second question, how can I read the vin number off the bcm?

So in the tech2win software. I was able to pull up the bcm information. Yet I haven’t used it inside a vehicle. Unfortunately I do not have access to a vehicle. I was trying to do strictly off vehicle programming.

Hi, so I recently got a VCX Nano (USB) model to do bench programming of Ecu, Bcm, and radios. I built a hardness with what I thought was the property connections. My question that when I try to program the bcm. I get a “naodrui” communication error. I setup everything properly and have...